Aluminum veneer is a commonly used decorative material in the construction and decoration industry. 1.5mm ceiling aluminum veneer is highly favored due to its advantages such as lightweight, high strength, fire resistance, moisture resistance, and sound insulation. Proper installation and maintenance can extend the service life of 1.5mm ceiling aluminum veneer and maintain its good decorative effect. This article will provide a detailed guide for the installation and maintenance of 1.5mm ceiling aluminum veneer.

1、 Installation Guide

preparation

Before installing the 1.5mm ceiling aluminum veneer, the following preparations need to be made:

(1) Determine the construction plan, including the specifications, quantity, and location of the ceiling panels;

(2) Prepare the necessary materials and tools, including suspension rods, keels, hooks, expansion screws, etc;

(3) Inspect the construction site to ensure compliance with safety requirements.

Installation steps

The specific installation steps are as follows:

(1) Determine the position and quantity of the suspension rods according to the design requirements, and fix them on the roof or wall;

(2) Use a hook to fix the keel on the suspension rod and adjust the height and levelness of the keel;

(3) Fix the expansion screw onto the keel and connect it to the suspension rod;

(4) Splice and assemble the 1.5mm ceiling aluminum veneer according to the design requirements, and fix it on the keel with self tapping screws;

(5) Check the flatness and verticality of the entire ceiling panel, and adjust it promptly if there are any unevenness or skewness.

2、 Maintenance Guide

Cleaning and maintenance

Regular cleaning and maintenance of 1.5mm ceiling aluminum panels can extend their service life and maintain good decorative effects. The specific method is as follows:

(1) Use a soft cloth or vacuum cleaner to clean surface dust and debris;

(2) Clean surface stains with neutral detergent and clean water;

(3) Dry the surface moisture with a dry cloth.